Manufacuturer, Exporters & Suppliers of Injection Moulding Machine

Injection moulding machine - 50 ton

Parth 50


Model Parth - 50
Injection Unit Unit
    A B  
Screw Diameter mm 32 35  
Injection Capacity Ma. ( GPS) gm 100 128  
Injection Pressure Max. bar 1777 1486  
Injection Rate (GPPS ) gm/sec 61 72  
Injection Screw Strock mm 150 150  
Screw L/D Ratio   22 20  
Screw Speed rpm 340 340  
No. Of Pyrometers ( Barrel + Nozzle )   3 + 1
Total Heat Capacity kw 6
 
Clamp Unit
Clamp Force ton 50
Clamp Strock mm 300
Maximum Day Light mm 620
Maximum Mould Height mm 150
Platen Size mm 320
Distance Between Tie Rod mm 500 X 500
Tie Rod Diameter mm 310 X 310
Ejector Stroke mm 60
Ejector Force ton 70
    2.8
General
Power Pack kw 7.5
Oil Tank Capacity ltr 200
Connected Load kw 13.5
Machine Dimension ( L X W X H ) mtr 3.1 X 0.9 X 1.4
Machine Weight ( Approx ) kg 2300

SAILENT FETURES


  • 5 Stage injection Speed / Pressure Including Hold Time With Times
  • Speed & Pressure Setting Upto 99.99 %
  • Display Of Pressure, Flow Time Temperature and Operationg Keys with Relevant LED's are easily accessible to operate on possible base fixed plzten
  • Proportional Temperature Controller, inter lock with Screw - Refilling. 5 point Toggle - Tapper Toggle
  • Stable energy efficient machine performance in attained via VS2 of a
  • Unique "SPEED AND PRESSURE MATCHING" Hydraulic circuit proportional valve saves. 25% power consumption Centralised lubricating System.
  • Double Cylinder Injection Unit
  • Low Pressure Mould Protection
  • Hydraulic Mould Height Adjustment
  • Energy Saving Pump

OPTIONAL FEATURES


  • Hydraulic Core Pull Device
  • Air Enjector Device
  • Hopper Dryer & Loder
  • Servo System
  • Praposilional Base
  • Electrically Controlled
  • VDP System