Manufacuturer, Exporters & Suppliers of Injection Moulding Machine

Injection moulding machinery - 220 ton Capacity

Parth 220


Model Parth - 220
Injection Unit Unit
    A B C
Screw Diameter mm 50 60 70
Injection Capacity Ma. ( GPS) gm 500 720 981
Injection Pressure Max. bar 2637 1831 1345
Injection Rate (GPPS ) gm/sec 130 187 255
Injection Screw Strock mm 280 280 280
Screw L/D Ratio   27 22 19
Screw Speed rpm 175 175 175
No. Of Pyrometers ( Barrel + Nozzle )   4 + 1
Total Heat Capacity kw 20.3
 
Clamp Unit
Clamp Force ton 220
Clamp Strock mm 550
Maximum Day Light mm 1250
Maximum Mould Height mm 700
Platen Size mm 820 x 820
Distance Between Tie Rod mm 570 x 570
Tie Rod Diameter mm 105
Ejector Stroke mm 160
Ejector Force ton 6.5
     
General
Power Pack kw 28.8
Oil Tank Capacity ltr 300
Connected Load kw 48.3
Machine Dimension ( L X W X H ) mtr 6.3 x 1.3 x 2.1
Machine Weight ( Approx ) kg 9000

SAILENT FETURES


  • 5 Stage injection Speed / Pressure Including Hold Time With Times
  • Speed & Pressure Setting Upto 99.99 %
  • Display Of Pressure, Flow Time Temperature and Operationg Keys with Relevant LED's are easily accessible to operate on possible base fixed plzten
  • Proportional Temperature Controller, inter lock with Screw - Refilling. 5 point Toggle - Tapper Toggle
  • Stable energy efficient machine performance in attained via VS2 of a
  • Unique "SPEED AND PRESSURE MATCHING" Hydraulic circuit proportional valve saves. 25% power consumption Centralised lubricating System.
  • Double Cylinder Injection Unit
  • Low Pressure Mould Protection
  • Hydraulic Mould Height Adjustment
  • Energy Saving Pump

OPTIONAL FEATURES


  • Hydraulic Core Pull Device
  • Air Enjector Device
  • Hopper Dryer & Loder
  • Servo System
  • Praposilional Base
  • Electrically Controlled
  • VDP System