Manufacuturer, Exporters & Suppliers of Injection Moulding Machine

Injection moulding machinery - 180 ton Capacity

Parth 180


Model Parth - 180
Injection Unit Unit
    A B C
Screw Diameter mm 50 55 60
Injection Capacity Ma. ( GPS) gm 384 465 553
Injection Pressure Max. bar 2117 1749 1470
Injection Rate (GPPS ) gm/sec 125 152 181
Injection Screw Strock mm 220 220 220
Screw L/D Ratio   22 20 20
Screw Speed rpm 250 250 250
No. Of Pyrometers ( Barrel + Nozzle )   4 + 1
Total Heat Capacity kw 12
 
Clamp Unit
Clamp Force ton 180
Clamp Strock mm 440
Maximum Day Light mm 970
Maximum Mould Height mm 150
Platen Size mm 530
Distance Between Tie Rod mm 815 X 815
Tie Rod Diameter mm 510 X 510
Ejector Stroke mm 100
Ejector Force ton 130
    8
General
Power Pack kw 22
Oil Tank Capacity ltr 400
Connected Load kw 34
Machine Dimension ( L X W X H ) mtr 5.5 X 1.2 X 2
Machine Weight ( Approx ) kg 7500

SAILENT FETURES


  • 5 Stage injection Speed / Pressure Including Hold Time With Times
  • Speed & Pressure Setting Upto 99.99 %
  • Display Of Pressure, Flow Time Temperature and Operationg Keys with Relevant LED's are easily accessible to operate on possible base fixed plzten
  • Proportional Temperature Controller, inter lock with Screw - Refilling. 5 point Toggle - Tapper Toggle
  • Stable energy efficient machine performance in attained via VS2 of a
  • Unique "SPEED AND PRESSURE MATCHING" Hydraulic circuit proportional valve saves. 25% power consumption Centralised lubricating System.
  • Double Cylinder Injection Unit
  • Low Pressure Mould Protection
  • Hydraulic Mould Height Adjustment
  • Energy Saving Pump

OPTIONAL FEATURES


  • Hydraulic Core Pull Device
  • Air Enjector Device
  • Hopper Dryer & Loder
  • Servo System
  • Praposilional Base
  • Electrically Controlled
  • VDP System