Manufacuturer, Exporters & Suppliers of Injection Moulding Machine

Injection moulding machines - 130 ton

Parth 130


Model Parth - 130
Injection Unit Unit
    A B C
Screw Diameter mm 40 45 50
Injection Capacity Ma. ( GPS) gm 224 283 349
Injection Pressure Max. bar 2706 2138 1732
Injection Rate (GPPS ) gm/sec 98 124 153
Injection Screw Strock mm 200 200 200
Screw L/D Ratio   22 22 20
Screw Speed rpm 300 300 250
No. Of Pyrometers ( Barrel + Nozzle )   4 + 1
Total Heat Capacity kw 9.5
 
Clamp Unit
Clamp Force ton 130
Clamp Strock mm 400
Maximum Day Light mm 910
Maximum Mould Height mm 180
Platen Size mm 510
Distance Between Tie Rod mm 685 X 685
Tie Rod Diameter mm 460 X 460
Ejector Stroke mm 85
Ejector Force ton 110
    8
General
Power Pack kw 15
Oil Tank Capacity ltr 300
Connected Load kw 24.5
Machine Dimension ( L X W X H ) mtr 4.6 X 1.1 X 1.85
Machine Weight ( Approx ) kg 5500

SAILENT FETURES


  • 5 Stage injection Speed / Pressure Including Hold Time With Times
  • Speed & Pressure Setting Upto 99.99 %
  • Display Of Pressure, Flow Time Temperature and Operationg Keys with Relevant LED's are easily accessible to operate on possible base fixed plzten
  • Proportional Temperature Controller, inter lock with Screw - Refilling. 5 point Toggle - Tapper Toggle
  • Stable energy efficient machine performance in attained via VS2 of a
  • Unique "SPEED AND PRESSURE MATCHING" Hydraulic circuit proportional valve saves. 25% power consumption Centralised lubricating System.
  • Double Cylinder Injection Unit
  • Low Pressure Mould Protection
  • Hydraulic Mould Height Adjustment
  • Energy Saving Pump

OPTIONAL FEATURES


  • Hydraulic Core Pull Device
  • Air Enjector Device
  • Hopper Dryer & Loder
  • Servo System
  • Praposilional Base
  • Electrically Controlled
  • VDP System