Manufacuturer, Exporters & Suppliers of Injection Moulding Machine

Injection moulding machine - 110 ton

Parth 110


Model Parth - 110
Injection Unit Unit
    A B  
Screw Diameter mm 35 40  
Injection Capacity Ma. ( GPS) gm 154 200  
Injection Pressure Max. bar 2200 1700  
Injection Rate (GPPS ) gm/sec 95 124  
Injection Screw Strock mm 180 180  
Screw L/D Ratio   22 20  
Screw Speed rpm 350 350  
No. Of Pyrometers ( Barrel + Nozzle )   3 + 1
Total Heat Capacity kw 6
 
Clamp Unit
Clamp Force ton 110
Clamp Strock mm 350
Maximum Day Light mm 780
Maximum Mould Height mm 200
Platen Size mm 430
Distance Between Tie Rod mm 610 X 610
Tie Rod Diameter mm 410 X 410
Ejector Stroke mm 85
Ejector Force ton 90
    4
General
Power Pack kw 11
Oil Tank Capacity ltr 250
Connected Load kw 17
Machine Dimension ( L X W X H ) mtr 4 X 1.2 X 1.5
Machine Weight ( Approx ) kg 4600

SAILENT FETURES


  • 5 Stage injection Speed / Pressure Including Hold Time With Times
  • Speed & Pressure Setting Upto 99.99 %
  • Display Of Pressure, Flow Time Temperature and Operationg Keys with Relevant LED's are easily accessible to operate on possible base fixed plzten
  • Proportional Temperature Controller, inter lock with Screw - Refilling. 5 point Toggle - Tapper Toggle
  • Stable energy efficient machine performance in attained via VS2 of a
  • Unique "SPEED AND PRESSURE MATCHING" Hydraulic circuit proportional valve saves. 25% power consumption Centralised lubricating System.
  • Double Cylinder Injection Unit
  • Low Pressure Mould Protection
  • Hydraulic Mould Height Adjustment
  • Energy Saving Pump

OPTIONAL FEATURES


  • Hydraulic Core Pull Device
  • Air Enjector Device
  • Hopper Dryer & Loder
  • Servo System
  • Praposilional Base
  • Electrically Controlled
  • VDP System